How To Fix Liquid Detected In Charging Port - CHARFGER
Skip to content Skip to sidebar Skip to footer

How To Fix Liquid Detected In Charging Port

How To Fix Liquid Detected In Charging Port. It’s most likely just some gunk in the charging port. Check for debris and other wet substances—you can use a small pin to carefully pry out wet debris inside.

Solved Moisture detected in charging port Samsung Community 608656
Solved Moisture detected in charging port Samsung Community 608656 from us.community.samsung.com

Once this fix doesn’t work, you’ll have to resort to another method which is. If you are certain that liquid or water isn’t the problem, then tap on the “emergency override” option and start charging your phone. If the same alert reappears, there may be liquid.

First Go Into Safe Mode And Find Out If Its A Hardware Or Software Problem.


You can also directly inspect the phone’s charging port by using a flashlight. Hold your iphone with the lightning port facing down, then gently tap it with your palm to ease liquid out of the port. Once this fix doesn’t work, you’ll have to resort to another method which is.

Restart Phone, Press Both Volume And Power Buttons While Its Restarting To Get There.


If your phone is charging: Up to 50% cash back 3. After you hit “dismiss,” the problem should go away.

Anyways So I Stuck A Tissue In The Port To See If I Could See How Much Water Was.


Disconnect and reconnect the cable. Afterward, tap gently on both sides of its connector facing down while holding tight so. If you get the same $@$* its the hardware, so theres some kind of moisture dmg.

Hold Your Iphone With The Lightning Port Facing Down, Then Firmly Tap It With Your Palm To Help Get Any Liquid Out Of The Port.


If you can see any water visible, keep shaking for around five seconds until nothing comes out anymore. The iphone warning “liquid detected in lightning connector” indicates that your phone’s charging connector is moist. Fix the liquid detected in lightning connector bug if it is a software issue

At First I Was Confused As To Why I Was Getting This Since I Usually Don’t Put The Phone Near Water And If It Is I Point It Away.


You can expedite the drying process to plug your phone in faster by patting the port area dry. To override the “charging not available” liquid detection alert, connect the lighting cable or accessory and wait for the message to appear. Now, gently try to clean the charging port by rubbing the cloth inwards.

Post a Comment for "How To Fix Liquid Detected In Charging Port"